Root (:) Commands - Keysight InfiniiVision M9241A Scpi Programmer's Manual

Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes
SCPI Programmer's Guide

7 Root (:) Commands

Control many of the basic functions of the oscilloscope and reside at the root level
of the command tree. See
Table 72 Root (:) Commands Summary
Command
n/a
:AUToscale
[<source>[,..,<source
page 205)
>]] (see
:AUToscale:AMODE
page
<value> (see
:AUToscale:CHANnels
page
<value> (see
:AUToscale:FDEBug {{0
| OFF} | {1 | ON}}
page 209)
(see
:BLANk [<source>]
page 210)
(see
Query
page
:AER? (see
n/a
:AUToscale:AMODE?
207) page 207)
(see
:AUToscale:CHANnels?
208) page 208)
(see
:AUToscale:FDEBug?
page 209)
(see
n/a
"Introduction to Root (:) Commands"
Options and Query Returns
204)
{0 | 1}; an integer in NR1 format
<source> ::= CHANnel<n>
<source> can be repeated up to 5
times
<n> ::= 1 to (# analog channels)
in NR1 format
<value> ::= {NORMal | CURRent}}
<value> ::= {ALL | DISPlayed}}
{0 | 1}
<source> ::= {CHANnel<n>} |
FUNCtion<m> | MATH<m> | FFT |
SBUS{1 | 2} | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
on page 203.
201