Keysight InfiniiVision M9241A Scpi Programmer's Manual page 433

Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes
SCPI Programmer's Guide
21 :MEASure Commands
Select automatic measurements to be made and control time markers. See
"Introduction to :MEASure Commands"
Table 96 :MEASure Commands Summary
Command
:MEASure:ALL (see
page 451)
:MEASure:AREa
[<interval>][,<source
page 452)
>] (see
:MEASure:BRATe
[<source>] (see
page 453)
Query
n/a
:MEASure:AREa?
[<interval>][,<source
page 452)
>] (see
:MEASure:BRATe?
[<source>] (see
page 453)
on page 448.
Options and Query Returns
n/a
<interval> ::= {CYCLe | DISPlay}
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= area in
volt-seconds, NR3 format
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# of analog
channels) in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= bit rate in
Hz, NR3 format
433