:SBUS<n>:A429:BASE
Command Syntax
:SBUS<n>:A429:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:A429:BASE command selects between hexadecimal and binary
display of the decoded data.
The BASE command has no effect on the SDI and SSM fields, which are always
displayed in binary, nor the Label field, which is always displayed in octal.
Query Syntax
:SBUS<n>:A429:BASE?
The :SBUS<n>:A429:BASE? query returns the current ARINC 429 base setting.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors
•
See Also
•
•
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see
page
1354)
"-241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE"
on page 725
":SBUS<n>:A429:FORMat"
on page 1295
on page 721
on page 734
27
:SBUS<n> Commands
729
Need help?
Do you have a question about the InfiniiVision M9241A and is the answer not in the manual?