Point I/O Module With A 1734-Adn, 1734-Acnr, 1734-Aent, Or; Apb Adapter - Rockwell Automation POINTBlock Series User Manual

180 Mounting Dimensions
POINT I/O Module with a
1734-ADN, 1734-ACNR,
1734-AENT, or 1734-APB
Adapter
Allow a 25.4 (1.0)
Air Gap All Around
133.4
(5.25)
mm (in)
1734-EP24DC or 1734-FPD (HxWxL)
76.2 (3.0) x 54.9 (2.16) x 133.4 (5.25)
Publication 1734-UM001D-EN-P - April 2008
See the figure for mounting dimensions for a POINT I/O module with a
network adapter. The example figure shows a 1734-ADN adapter.
Mounting Dimensions
L = 2.16 + [# of I/O x 0.47] + [# of EP24DC or FPD x 1.0] in.
L = 54.9 + [# of I/O x 12.0] + [# of EP24DC or FPD x 25.4] mm
Adapter
Status
DeviceNet
Status
PointBus
Status
1734-ADN
System
Power
Field
Power
1734-EP24DC or 1734-FPD (HxWxL)
76.2 (3.0) x 25.4 (1.0) x 133.4 (5.25)
Secure DIN rail to mounting surface approximately every 200 mm (7.8 in.).
30880
1734-TB or 1734-TBS with I/O (HxWxL)
76.2 (3.0) x 12.0 (0.47) x 133.4 (5.25)