Table of Contents
Advertisement
Configure the Module for Use
with a MicroLogix Controller
To work with the MicroLogix controller, follow these instructions to prepare the
1769-ASCII module.
1. Open your project.
2. Right-click the 1769-ASCII module and choose Properties.
Make sure Series and Revision match with the hardware.
3. Review and make sure you have the correct module.
4. Type a name.
5. Type a Description.
6. Review the Module Definition area and make sure the information is
correct.
7. Click Change on the General tab to modify the module definition
parameters.
Rockwell Automation Publication 1769-UM012B-EN-P - January 2014
Configure the 1769-ASCII Module
Chapter 2
59
Advertisement
Table of Contents
