Rockwell Automation POINTBlock Series User Manual page 135

You can calibrate both voltage input channels at the same time using one
voltage source.
Channel 0
Connect to 0 and 4
Channel 1
Connect to 1 and 5
250 Ω
1. Double-click the icon to bring up the General parameter dialog.
2. Click Device Parameters to view the parameters.
You see the EDS Editor dialog that asks you if you want to upload the
configuration from the device.
3. From the EDS Editor dialog, click Upload.
Calibrate Your Analog Modules
DeviceNet Input
0 1 0 1
0 1
Power Supply Voltage
Voltage Source
Publication 1734-UM001D-EN-P - April 2008
133
0 1 0 1 0 1
4032