Preface; Purpose Of This Manual; Who Should Use This Manual - Rockwell Automation POINTBlock Series User Manual

Purpose of This Manual

Who Should Use This
Manual
13
This manual describes how to install, configure, and troubleshoot your
POINT I/O modules.
The POINT I/O modules in this manual are DeviceNet ready. Each module
can exist on the DeviceNet network as one of the following:
• As an individual node
• With an adapter (catalog number 1734-ADN or 1734-ADNX) as a
single node
When using these POINT I/O modules with an adapter, use this manual in
conjunction with the user manual for the adapter you are using as shown in the
table.
For applications using these modules in a network with a 1734-PDN
DeviceNet Communication Interface, or a 1734D-xx POINTBlock I/O
module, this user manual is the primary documentation.
When Using POINT I/O Refer to User Manual
Modules on This for
Network
DeviceNet network DeviceNet adapter
ControlNet network ControlNet adapter
EtherNet/IP network EtherNet/IP adapter
PROFIBUS network PROFIBUS adapter
In this manual, we assume you know how to do the following:
• Use RSNetWorx software or similar configuration software to set up
and calibrate these modules.
• Have the capability to download and use electronic data sheet (EDS)
files.
If you do not, refer to your software documentation or online help before
attempting to use these modules.

Preface

Cat. No. Publication No.
1734-ADN 1734-UM002
1734-ADNX
1734-ACNR 1734-UM008
1734-AENT 1734-UM011
1734-APB 1734-UM005
Publication 1734-UM001D-EN-P - April 2008