Replacing A Smoke Detector - Huawei FusionModule800 Maintenance Manual

FusionModule800 Smart Small Data Center
Maintenance Guide
Follow-up Procedure
Check whether the new temperature sensor works properly. If its status is displayed on the
WebUI of the ECC800, the new temperature sensor works properly.

5.4.14 Replacing a Smoke Detector

Prerequisites



Context
The smoke detector is installed in the Converged Cabinet, as shown by (1) in
Figure 5-68 Sensor positions
(1) Smoke detector
Procedure
Step 1 Rotate the smoke detector and remove it from the base, as shown in
Issue 02 (2016-11-15)
Recommended tools and materials: Phillips screwdriver, insulation tape, step ladder (2
m)
A smoke detector needs to be replaced.
Spare smoke detectors of the same model are available and functional.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Water detector
Figure
5 Parts Replacement
Figure 5-68.
5-69.
107