Replacing Ecc800 Antennas - Huawei FusionModule800 Maintenance Manual

FusionModule800 Smart Small Data Center
Maintenance Guide
Figure 5-52 Removing the smart ETH gateway
Step 4 Install the new smart ETH gateway in the original position and connect the cables.
----End

5.4.6 Replacing ECC800 Antennas

Prerequisites


Procedure
Step 1 Remove the 2.4G antenna and the cable connected to the RF_Z antenna port on the ECC800.
Step 2 Remove the 3G antenna and the cable connected to the 3G/4G antenna port on the ECC800,
as shown in
Issue 02 (2016-11-15)
Tools: ESD wrist strap, ESD gloves
Materials: Spare ECC800 antennas of the same model are available and functional.
Figure 5-53.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
96