Huawei FusionModule800 Maintenance Manual page 36

FusionModule800 Smart Small Data Center
Maintenance Guide
Context
The BOM number of the door status sensor is 33010007. The door status sensor is usually
installed on the cabinet aisle door, as shown in
Figure 5-2 Door status sensor installation position
(1) Door status sensor installation position
Procedure
Step 1 Remove the cover of the door status sensor manually.
Step 2 Remove the communications cable using a Phillips screwdriver and insulate the cable.


Step 3 Remove the door status sensor from the conversion bracket on the cabinet door using a
screwdriver, as shown in
Issue 02 (2016-11-15)
When removing cables, label the cables with corresponding terminal ports for later
connection.
When removing cables, wrap bare cables with insulation tape to avoid hazards.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-2.
5-3.
5 Parts Replacement
30