FusionModule800 Smart Small Data Center
Maintenance Guide
3.
4.
5.
Issue 02 (2016-11-15)
Figure 5-72 Removing the cover from the water detector
Remove the bottom plate of the water detector from the Converged Cabinet, as shown in
Figure
5-73.
Figure 5-73 Removing the bottom plate of the water detector
Install the new water detector in the Converged Cabinet by referring to the preceding
steps.
Connect the new water detector to the conversion cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
111