Huawei FusionModule800 Maintenance Manual page 43

FusionModule800 Smart Small Data Center
Maintenance Guide
Figure 5-9 Removing the indicator protective panel
Step 3 (Optional) Open the front door of the Converged Cabinet, remove the protective panel of the
ATS PDU, and remove the indicator panel, as shown in
This step is performed only when an ATS PDU is configured.
Figure 5-10 Removing the indicator panel of the ATS PDU
Step 4 Loosen the screw at the back of the indicator using a Phillips screwdriver, and remove the
cables, as shown in
When removing cables, label the cables with corresponding terminal ports for later connection.
Issue 02 (2016-11-15)
Figure 5-11.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure 5-10.
37