Huawei FusionModule800 Maintenance Manual page 52

FusionModule800 Smart Small Data Center
Maintenance Guide
Figure 5-14 Removing the front panel from the ATS PDU
Step 3 Remove cables from the top of the ATS controller, as shown by (1) in
After removing cables, wrap exposed terminals with insulation tape and do not block cable
labels. If cable labels are blocked, cables may be connected incorrectly.
Figure 5-15 Removing an ATS controller
Step 4 Remove the screws securing the ATS controller and ATS PDU, as shown by (2) in
5-15.
Issue 02 (2016-11-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure 5-15.
Figure
46