Changing Colors Of Strokes - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

2. Using a Whiteboard
1. Touch
The cut or copied content is pasted.
Also, dragging the pasted stroke continuously, you can move it.
You can also touch
whiteboard screen. When you do this, the cut or copied contents are pasted in the same
position where the menu is displayed.
2. Enlarge, reduce, or move the figure or stroke as you want.
For details, see page 46 "Enlarging, Reducing, or Moving the Strokes".
• The cut or copied strokes are saved temporarily until one of the following operations is performed:
• Another stroke is cut or copied.
• The machine is shut down.
• The machine enters standby mode.
• The whiteboard is closed.
• A remote whiteboard in compatible mode is opened.

Changing Colors of Strokes

1. Touch , the Select and Delete icon, and check that
not selected, touch
You can also touch
the whiteboard screen.
50
[Paste].
[Paste] on the menu that appears when you touch and hold down the
, the Select icon.
, the Select icon, on the menu that appears when you touch and hold down
, the Select icon, is selected. If it is