Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 213

Item
Device Management (SNMP)
Enable HDMI Converter
Support Mode
Reduce Frame Rate of External
Input Display on Whiteboard
*3
Operation
Description
Set this item when you want to use a device
management software. Select [SNMP v1/v2]
or [SNMP v3] according to the software you
are using. If you enable this item, the following
items must be specified:
• Community Name
• User Name
• Authentication Password
• Encrypted Password
• Context Name
Depending on the settings, the items you can
specify may differ.
Select this to connect an HDMI converter to the
machine.
If this setting is disabled and a device is
connected to the converter, a black screen is
displayed on the machine.
If this setting is enabled and a device is
connected to the converter, the whiteboard
screen is displayed.
Specify whether or not to reduce the frame rate
of the external input display while operating the
whiteboard. Use this function if the response is
poor when operating the whiteboard while
displaying external input.
Changing the System Settings
Initial value
SNMP v1/v2
Not selected
Not selected
211