Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 115

Send a registration request to the contact. When the request is approved, the contact is registered.
For details, see help in RICOH Unified Communication System Settings.
This machine can also be used to approve registration requests from contacts. If a registration
request is received, a message is displayed. Check the contact according to the message, and
approve the registration request as appropriate.
Adjusting the Camera
You can use the dial to adjust the camera direction.
For details about the dial, see Installation Guide.
Connecting a device (If using an external device)
You can connect an external camera, microphone, or speaker to the machine.
For details about how to connect these types of external devices, see page 87 "Devices That Can
Be Connected to the Machine".
For details about how to connect an external device via Bluetooth, see page 233 "Managing
Devices Connected via Bluetooth".
Switching to RICOH UCS mode
You can use the floating toolbar to switch the screen display mode to RICOH UCS mode. For
details, see page 19 "Screen Configuration".
Specifying the settings
Before connecting to a contact to have a meeting, you must first specify the audio and camera
settings. For details, see page 116 "Specifying the Settings".
Using the RICOH UCS Function
113