Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 22

1. Overview
3. Page operation panel
The icons and thumbnails in this area are used to switch and edit pages. For details about the icons displayed,
see page 22 "Icons Displayed on the Interactive Whiteboard".
While an externally input image is displayed, the Page operation panel will disappear automatically if no
operations are performed for 10 seconds.
The page operation panel can be shown or hidden by pressing
4. Floating toolbar
The floating toolbar is displayed only when the RICOH UCS function is enabled. For details about the RICOH
UCS function, see page 109 "Using the RICOH UCS Function".
You can change the position of the floating toolbar.
The floating toolbar contains the following icons:
Icon
Standby
RICOH UCS
Whiteboard
5. Move the main operation panel icon
Moves the main operation panel to the opposite side. The IP address, passcode, and date and time also move
together with the panel.
By default, this icon is located on the bottom-left corner of the screen. When the main operation panel is
moved to the left, the icon moves to the bottom-right corner of the screen.
20
Changes the machine to the standby mode.
• page 21 "Screen Display Modes"
Switches to RICOH UCS mode.
• page 109 "Using the RICOH UCS Function"
Switches the screen to whiteboard mode.
• page 21 "Screen Display Modes"
/ , the Show and Hide icons.
Description