Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 171

Wired Network Settings
Item
Network Auto Settings
DNS Auto Settings
Ethernet Rate
802.1X Authentication
*1
Settings
MAC Address
*1 This item cannot be displayed from the machine's Web page.
Description
Specify whether or not to configure the Network
Settings automatically.
If you clear this check box, specify the following
settings:
• IP Address
• Subnet Mask
• Default Gateway
• Dynamic DNS is not supported. If "Network
Auto Settings" is selected, the IP address is
obtained automatically, but the host name is
not set.
Specify whether or not to configure the DNS
server settings automatically.
If you clear this check box, specify the following
settings:
• Preferred DNS Server
• Alternate DNS Server
Selects an Ethernet speed.
Configure the settings to use the 802.1X
authentication function in a wired LAN.
Indicates the MAC address of the wired LAN
adapter.
Configuring Network Settings
Initial value
Selected
Selected
Auto Settings
-
-
169