Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 277

Message
Connection has failed
Another user is using
administrator settings
Please re-enter later.
Cannot start the
application because the
software is an earlier
version.
Go to administrator
settings and update the
software from system
update.
Causes
Failed to communicate with the
server.
The following are possible
causes:
• Cannot access the
network.
• The network settings are
incorrect.
• The server settings are
wrong.
• The administrator settings
are being configured
remotely from another
computer.
• The administrator settings
are being configured on
the machine.
The controller has been
installed on a new machine with
the old software installed on the
controller Type 1.
If a Message is Displayed during Operation
Solutions
Check the network settings and the
server settings. Also, check the
network status.
Wait a while and try again later.
Update the software from System
Update in Administrator Settings. For
details about how to update the
system, see page 204 "Updating
Your System".
275