Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 173

Item
Network Auto Settings
DNS Auto Settings
MAC Address
*1 This item cannot be displayed from the machine's Web page.
• For details about how to configure a wireless network, see Help on your computer and the manual
of the device to be connected.
• When [Power Save] is set to [High] on the settings screen displayed by pressing the [Menu] button
on the side or front of the display, and the display is in the power saving mode or in the DC off
mode, the LAN function cannot be used.
Description
Specify whether or not to configure the Network
Settings automatically.
If you clear this check box, specify the following
settings:
• IP Address
• Subnet Mask
• Default Gateway
• Dynamic DNS is not supported. If "Network
Auto Settings" is selected, the IP address is
obtained automatically, but the host name is
not set.
Specify whether or not to configure the DNS
server settings automatically.
If you clear this check box, specify the following
settings:
• Preferred DNS Server
• Alternate DNS Server
Indicates the MAC address of the wireless LAN
adapter.
Configuring Network Settings
Initial value
Selected
Selected
-
171