Changing The Print Settings - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

8. Changing the Interactive Whiteboard Settings

Changing the Print Settings

You can configure the following settings on the "Print Settings" window in Administrator Settings.
When using a printer using Universal Print Driver for this machine, be sure to configure the following
settings:
Item
Printer Address
Print Authentication
User Code
User Name
Password
230
Description
Sets the IP address of the printer. You also can enter
the host name.
RICOH Streamline NX v2
If you are using RICOH Streamline NX-based
authentication, enter the SPM (Secure Print
Manager) server address of the printer.
RICOH Streamline NX v3
If you are using RICOH Streamline NX-based
authentication, enter the Delegation server
address of the printer.
Specifies the type of Print Authentication.
• "No"
Do not authenticate printing. When the settings
are being configured from the Web page of the
machine, this item is displayed as [Off].
• "User Code Authentication"
Use a user code for Print Authentication.
• "User Authentication"
Use a user name and password for Print
Authentication.
If "User Code Authentication" is selected in "Print
Authentication", enter a user code of 0 to 8 digits.
If "User Authentication" is selected in "Print
Authentication", enter a user name that consists of a
character string of 0 to 128 characters.
If "User Authentication" is selected in "Print
Authentication", enter a password that consists of a
character string of 0 to 128 characters.
Initial value
Blank
No
Blank
Blank
Blank