Using A Projector To Project A Screen - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

3. Connecting Devices

Using a Projector to Project a Screen

You can connect a projector that supports full-HD to the machine to project its screens.
• The machine cannot be connected to an analog input terminal such the VGA input of a projector.
A Ricoh projector which supports full-HD is recommended for use with the machine. Supported models
are as follows:
• PJ WX3231N/X3241N
• PJ WX3340N/WX3340/X3340N/X3340
• PJ WX4130N/WX4130
• PJ WX4240N/X4240N
• PJ WX4141/WX4141N/WX4141NI
• PJ WX5350N/X5360N
• PJ WX5361N/X5371N
• RICOH PJ X3351N/WX3351N
• RICOH PJ X4241N/WX4241N
1. Connect a projector to the output terminal on the side of the machine.
For the input terminals to connect external devices, see page 87 "Devices That Can Be Connected
to the Machine".
106
DHG038