Configuring Region And Language Settings - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

Configuring Region and Language Settings

You can configure the following settings on each tab of "Region and Language" window in
Administrator Settings.
Touch [Region] or [Language] in the [Region and Language] dialog box to display the following tab or
screen.
[Formats] tab
Specify the language you want to use to display the information such as date or time.
[Location] tab
Specify the current region.
[Change your language preference] configuration screen
Specify the keyboard language and text display language you want to use.
Use the following procedure to select the language to use:
1. From the list, select the language you want to use.
2. Touch [Move up] to move the language you want to use to the top of the list.
3. Close the window.
[Administrative] tab
Specify the language you want to use to display a text from a program that does not support
Unicode.
• After you finish changing the settings, the login screen may appear. In such case, quickly press and
release the power button of the display. When the machine shuts down, press the power button
again to restart the machine.
• If you use [Change system locale] in the [Administrative] tab to change the locale, a message is
displayed which asks whether to shut down the system. When you close the message, the system
restarts. If you want to change the region or language, we recommend using [Change system
locale] after completing the other changes.
• From the Web page of the machine, you can specify [Current Location] and [Display Language].
Configuring Region and Language Settings
173