Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 211

Item
Default Whiteboard Detailed
Settings
Use RICOH Interactive
Whiteboard Client Function
Handwritten Entry with Touch
Pen
Use Crestron Control System
*2
*2
Address
*2
Port Number
*2
IP ID
Description
Specifies the default whiteboard detailed
settings.
For details about each item, see page 157
"Changing the Detailed Settings".
Specifies whether or not to use the "RICOH
Interactive Whiteboard Client" function to
access a remote whiteboard from an iPad,
Android tablet, or Windows PC.
Select this setting to use the handwritten entry
mode with touch pen or your fingers. However,
you cannot use the marker function with the
interactive pen and the bottom of the interactive
pen (erase, right-click) if this setting is specified.
Also, the recognition accuracy may decrease,
or the strokes may become connected when the
lines are drawn too fast.
This item is displayed only when using the
RICOH Interactive Whiteboard D5520/
D6500/D6510/D7500/D8400.
Specifies whether or not to use the Crestron
function. When this check box is selected, the
Crestron function becomes enabled, and you
can then enter the IP address, port number, and
IP ID of Crestron Control System.
Specify the IP address or host name (up to 255
characters) of Crestron Control System.
Specify the port number (an integer from 0 to
65536) of Crestron Control System.
Specify the IP ID (an integer between 3 and
254) of Crestron Control System.
Changing the System Settings
Initial value
*5
Selected
Not selected
Not selected
Blank
41794
3
209