Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 143

• For details about how to participate in a remote whiteboard session, see page 147
"Participating in a Remote Whiteboard Session".
• For details about how to install Remote Viewer, see page 307 "Installing Remote Viewer on a
Computer".
• For details about how to participate in a remote whiteboard session from a projector, see the
manual of the projector or Interactive Kit.
• Smart devices that can connect to a remote whiteboard using RICOH Interactive Whiteboard
Client are as follows:
• iPad (4th generation or later) (iOS11/12)
• Android tablet (Android 6.0-8.0)
• Windows devices (Windows 7/10)
• Up to 20 whiteboards including the host whiteboard can participate in a remote whiteboard
session at the same time. Up to 50 devices in which RICOH Interactive Whiteboard Client is
installed can participate in a remote whiteboard session at the same time.
• To use RICOH Interactive Whiteboard Client, a network speed of 200 kbps or faster is
required.
• To install RICOH Interactive Whiteboard Client, OpenGL 2.0 or later must already be
installed on the whiteboard.
• For details about RICOH Interactive Whiteboard Client, see "RICOH Interactive Whiteboard
Client Start Guide".
• If the version of the participating whiteboard is earlier than 3.2.10005.0, the custom stamps
used on the host whiteboard and the images captured by using
Screen icon on the host whiteboard, cannot be displayed on the participating whiteboard
screen.
Overview of Remote Whiteboard
, the Capture Part of the
141