While Using Remote Whiteboard; When Using A Usb Flash Memory Device - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

9. Troubleshooting

While Using Remote Whiteboard

Problem
A connection is not
established although the
previously used passcode
has been entered.

When Using a USB Flash Memory Device

Problem
A USB flash memory device
is not recognized.
A message prompting for
restart appears when a USB
flash memory device is
inserted.
292
Causes
The entered passcode is
incorrect.
Causes
The "Use USB Memory"
check box in Administrator
Settings is not selected.
A configuration change
requiring system restart has
been made.
Solutions
A different passcode is generated
each time the Interactive Whiteboard
starts up. To participate in a remote
whiteboard session, check and use the
correct passcode.
Solutions
Select the "Use USB Memory" check
box in Administrator Settings. For
details about how to change the
system settings, see page 206
"Changing the System Settings".
Quickly press and release the power
button of the display. When the
machine shuts down, press the power
button again to restart the machine.
When you are using RICOH
Interactive Whiteboard D3210/
D8600 and [For standby press the
power button] is enabled, press and
hold the power button to shut down
the machine while the whiteboard
screen is displayed.