Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 40

2. Using a Whiteboard
Horizontal and vertical lines, circles, and rectangles are also recognized and corrected automatically.
1. Touch , the Fair Copy Entry mode icon.
2. Select the color, size, and language of the characters to be entered.
A guideline that corresponds to the selected character size is displayed.
3. Write characters with the pen in the squares on the guideline.
Handwritten characters are recognized and converted automatically, and displayed as text data.
• Japanese, Chinese, or Korean characters are recognized and converted into text for each single
character. Alphanumeric entries are recognized for each single word.
• If a hand-written Japanese, Chinese, or Korean character is not recognized correctly, touch and
hold the character until the list of candidates appears. Then, select the correct character from the
list.
• The size of the character is not affected by changing the line width. An appropriate thickness is
automatically applied to the character according to the size of the character.
• A line that protrudes greatly from the guideline is recognized as a separate stroke.
• To deepen the color of the guide line, select the [Darken the color of grid/guide line] check box in
System Settings. For details, see page 206 "Changing the System Settings".
• If you change to remote whiteboard in compatible mode, the entered characters are converted to
an image and cannot be edited anymore.
• If you want to enter a small figure that may be converted as a character in fair copy entry mode,
you can configure the machine to perform figure recognition in the Whiteboard Detailed Settings.
For details, see page 157 "Changing the Detailed Settings".
Writing in line entry mode
Write freehand lines and arrows.
1. Touch , the Line Entry mode icon.
2. Select the color, thickness, and type of the line you are drawing.
38
DHG575