Changing The System Settings - Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual

8. Changing the Interactive Whiteboard Settings

Changing the System Settings

You can configure the following settings on the "System Settings" window in Administrator Settings.
Item
Whiteboard Location Name
Update system from network
on startup
Check the Latest Version
*2
Upload
Display confirmation dialog
box before system update
Auto Shutdown Time
206
Description
To change the name, touch [Change]. Specifies
the name of the location where the machine is
installed. The location name can consist of a
string of 0 to 255 characters.
Specify whether or not to automatically update
the system when the whiteboard starts.
Touch [Check the Latest Version] to check if a
newer version of the system is available for
update on the network.
Updates the system using firmware
downloaded to your computer in advance.
Specify whether to show a confirmation
message when restarting the machine. Note
that even if you enable this item, a confirmation
message appears only when you turn the
power off by using the power button on the
display. If you turn the power off from a Web
page, or the machine restarts automatically, a
confirmation message does not appear.
Specifies the time interval before the machine
automatically shuts down.
However, the machine does not shutdown
automatically when a screen or image from a
device connected to the machine is displayed,
or when printing is in progress.
Initial value
Blank
Selected
-
-
Selected
5 hour(s)