Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 172

8. Changing the Interactive Whiteboard Settings
Wireless Network Settings
Item
Connect to Access Point etc.
*1
Manually Connect Wireless
*1
Network
*1
Delete Settings
170
Description
Configures the settings to connect to a network
node such as the access point.
Touch [Connect to Access Point etc.] to display
the list of access points that can be connected.
From the list, select the network name (SSID) to
which to connect, and then enter the network
security key to connect to the access point.
If the network name (SSID) of the access point
you want to connect to is not found on the list,
touch [Manually connect wireless network] to
open the configuration screen, and manually
configure the wireless network.
Manually adds a wireless network configuration.
To add a setting, touch [Manually Connect
Wireless Network] to open the configuration
screen, and enter the following information of the
access point to connect:
• Network name
• Security type
• Encryption type
• Security Key
Also, select the following settings if necessary:
• [Start this connection automatically]
• [Connect even if the network is not
broadcasting]
Delete all the information about access points that
is registered to the machine.
Initial value
-
-
-