Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 257

Message
Cannot access the shared
folder
Cannot access to the
network.
Try again later.
If there is no improvement
contact your administrator.
Cannot access the shared
folder
The following are possible
causes.
• The network settings
are incorrect
• The network cable is
not connected
Check the network status
and then try again.
Causes
• The shared folder does
not work correctly.
• The server with the
shared folder is not
correctly connected to
the network.
• The shared folder is not
configured to use CIFS
protocol.
• The network cable is
not properly
connected.
• The IP address is not
configured.
• The DNS server is not
configured.
• The IP packet cannot
reach the shared folder
because a different
subnet mask is
specified.
• CIFS (SMB)
communication is
prohibited in the
network.
The network settings are
incorrect.
If a Message is Displayed during Operation
Solutions
Make sure that the shared folder can
be accessed from a computer, and
then try to save the data again.
Check the network settings, and then
try again.
255