Ricoh Interactive Whiteboard Controller Type 2 Operating Instructions Manual page 105

1
1. Subwindow display
You can operate the machine displaying the images from the video conferencing device on the subwindow
located at the upper right of the screen.
You can display the image in a subwindow by pressing the [Enter/Input] button on the side or front of the
display and selecting "PIP" from the menu. You can also display the image in a subwindow by pressing the
[PIP] button on the remote control.
2. Full screen display
You can expand the image to full screen or hide the image by pressing the [Enter/Input] button on the side or
front of the display.
• When the machine is in the process of recognizing a video conferencing device, a message
indicating that is displayed. If the machine successfully recognizes the device, a confirmation
screen for starting screen sharing is displayed.
• You cannot write to an image input from a video conferencing device.
• You cannot use an image input from a video conferencing device in the whiteboard application or
recorded as a captured page.
• For details about how to use a video conferencing device, see the manual of the device you are
using.
• If the main operation panel is hidden by the subwindow, touch
Panel icon, and move the main operation panel.
• You can move the displayed subwindow. For details about how to move the subwindow, see
page 315 "Adjusting the Display".
• The machine will automatically adjust the display area of a video conferencing device image when
it is expanded to full screen. For details about how to adjust the display position, see page 315
"Adjusting the Display".
Connecting a Video Conferencing Device to the Machine
2
, the Move Main Operation
DHG037
103