Pcl Assembly - General DataComm Xedge 6000 Series Hardware Installation

Table of Contents

Advertisement

V7.x Packet Controllers

PCL Assembly

The PCL assembly consists of a PCL base card and a LIM Personality Module (LPM-X)
daughtercard. This assembly can support two Line Interface Modules (LIM1 and LIM2) installed
at backplane connectors, as shown in the figure accompanying
The PCL base card has a single connection to the main backplane, a single connection to
the switch fabric and a single connection to LIM1.
The LPM daughtercard provides an additional connection to the switch fabric, and a
connection to a second LIM (LIM2).
LPM/LIM Applications
PCL is shipped with one of two types of LPM cards. Depending on the LPM, a combination of Utopia
or Serial LIMs can be installed as LIM1 and LIM2, as defined below.
PCL Assembly
(Future)
200M006-001
Note
At the Physical Layout screen, a PCL with LIM cards installed will be displayed as
not affect the functionality of the PCL or its associated LIMs.
Supported Line Interface Modules (LIMS)
Table 4-5
lists Xedge LIMs supported by the PCL. To set up hardware options and install LIMs for
the PCL, refer to Chapter 5, Line Interface Modules . To configure LIMs, refer to the Xedge V7.x
Configuration Guide.
Table 4-5
Xedge LIMs for PCL Module
Xedge LIMs
Application
155M-2
2-port OC-3, short reach with single port APS
155I-2
2-port OC-3, intermed. reach with single port APS 032P150-012
155L-2
2-port OC-3, long reach with single port APS
155M-APS
2-port OC-3, short reach with dual port APS
155I-APS
2-port OC-3, intermed. reach with dual port APS
155L-APS
2-port OC-3, long reach with dual port APS
155E-2
2-port STM-1 electrical LIM for ATM transport
DSX1-IMA+
16 link Inverse Multiplexing for ATM LIM
E1-IMA+
16 link Inverse Multiplexing for ATM LIM
DS3-2C
2-port DS3 LIM for ATM transport
E3-2C
2-port E3 LIM for ATM transport
DS1-2CS
2-port DS1
DS1-4CS
4-port DS1
E1-2CS
2-port E1
E1-4CS
4-port E1
HSSI-DCE
2-port HSSI LIM, Frame (DCE)
HSSI-DTE
2-port HSSI LIM, Cell (DTE)
SI-2C
2-port serial I/O
LCE-16
Legacy circuit emulation 16 link LIM
4-14
LPM in Use
LIM1 (behind PCL)
LPM-5
Serial LIM
LPM-6
Serial LIM
Xedge 6000 Hardware
Installation & Setup Guide
PCL Controller Overview
Table 4-4
LIM2 (behind LPM-6)
Serial LIM
Utopia LIM
Unknown
Part No.
LIM Type
PCL Compatibility
032P150-011
Utopia
Utopia
032P150-013
Utopia
032P150-001
Utopia
032P150-002
Utopia
032P150-003
Utopia
032P151-001
Utopia
032P153-023
Utopia
032P153-033
Utopia
032P046-001
Serial
032P108-001
Serial
032P098-012
Serial
032P098-011
Serial
032P098-002
Serial
032P098-001
Serial
032P022-001
Serial
032P022-002
Serial
032P094-002
Serial
032P187-001
Serial
032R440-000
Issue 17
. This does
(Future)
(Future)
(Future)
(Future)
(Future)
(Future)
(Future)
Supported
Supported
Supported
Supported
(Future)
(Future)
(Future)
(Future)
(Future)
(Future)
(Future)
Supported

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xedge 6280Xedge 6160Xedge 6645Xedge 6002Xedge 6640

Table of Contents