General DataComm Xedge 6000 Series Hardware Installation page 112

Line Interface Modules
Table 5-3
E&M Specifications & Parameters
E&M Audio
Parameters
E&M Signaling
Parameters
5-10
Maximum Output Level
Maximum Input Level
Nominal Input Impedance
Nominal Output Impedance
Gain Adjust Transmit/Receive
Gain Adjust Steps
Idle Channel Noise, Psophometric Weighted
Frequency Response, 300 Hz to 3,000 Hz
Isolation
E&M Signaling Type
Configurable Signaling
Maximum Output Signaling Current
Output Signaling Voltage
E&M Circuit Isolation
Xedge 6000 Hardware
Installation & Setup Guide
Analog Voice LIM
+.5 dBm
+1.0 dBm
600 phm
600 ohm
±6 dB
N/A (±0.5 dB)
< -74 dBm
±0.2 dB
1,000 VAC
I, II, III, IV, or V
Signaling Unit
35 mA
-24 V to -60 V
1,000 VAC
032R440-000
Issue 17