General DataComm Xedge 6000 Series Hardware Installation page 29

Xedge Hardware Overview
Table 1-6
Xedge System Cabinets, Chassis, Cable List, Accessories (Continued)
Adapter Cable, 68-pin high density to 8-pin RJ-48 modular, 6 ft (for AVM LIM)
Adapter Cable, 68-pin high density to dual 50-pin amphenol, 8 ft (for T1/E1 MP16 LIM)
Copper/Coax Cables for Data LIMs
Cable, DB37 male-to-female straight-through, 5, 15, 25, or 50 ft
Cable, DB37 female-to-DB25-male (Xedge to TMS RS-449/422), 5, 15, 25, 50, or 100 ft
Cable, DB37 female-to-DB25-female (Xedge to LAN*TMS), 5, 15, 25, 50, or 100 ft
Cable, Xedge HSSI male-to-male crossover
Cable, Xedge RS-449/V.35 female DTE
Cable, Xedge RS-449/V.35 male DTE
Cable, Xedge RS-449/V.11 OCM
Cable, Serial I/O to X.21 DCE
Cable, Serial I/O to X.21 DTE
Cable, Serial I/O to EIA/TIA 530 DCE
Cable, Serial I/O to EIA/TIA 530 DTE
Cable, Serial I/O to RS449 DCE
Cable, Serial I/O to RS449 DTE
Cable, Serial I/O to V.35 DCE, 5, 14, or 15 ft
Cable, Serial I/O to V.35 DTE, 5, 14, or 15 ft
Cable, Coax 75 ohm with BNC connector, 10, 25, 50 or 100 ft
Cable, Xedge 530 male DTE, 4, 6, 7, 8, 9, or 10 ft
Cable, Xedge 530 female DCE, 6 or 10 ft
Cable, Xedge RS530 male DCE, 3, 4, 6, 8, or 10 ft
Fiber Optic Cables for Data LIMs
Cable, Fiber Patch Cable, Duplex, LC-LC, Singlemode 9/125 Micron Fiber, 7 Meter (OC-N)
Cable, FC/PC to FC/PC Single Mode Fiber (3, 9, 20, 100 ft)
Cable, Duplex, SC to FC Single Mode Fiber (10, 20, 50 or 100 ft)
Cable, Duplex, SC to SC Single Mode (10, 20, 50 or 100 ft)
Cable, Duplex, SC/PC to SC/PC Multi Mode Fiber (10, 20, 50 or 100 ft)
Miscellaneous
Cable, 100 Ohm (DS1), 25-twisted pair shielded cable
Cable, 120 Ohm (E1), 25-twisted pair shielded cable
Cable, 120 Ohm (E1), 4-twisted pair shielded cable
Optional Distribution Panel, RJ48M to RJ48C (for T1/E1 MP16, T1/E1 HDCC and all IMA/+ LIMs) S-032A011-002xx
Optional Cable Adapter, Patton 460 Balun 75 Ohm adapter (for E1 IMA/+ LIM)
Kit, EIA530/EIA232 Distr Panel with two extender cables (for LCE-16 LIM)
Cable, LCE-16 Breakout Panel Cable (part of 032M130-002 kit)
Kit, 100 Ohm DS1 Distr Panel with 2-100 Ohm (DS1), 25-twisted pair shielded cables (T1-IMA/+)
Kit, 120 Ohm E1 Distr Panel with 2-120 Ohm, 25-twisted pair shielded cables (E1-IMA/+)
Kit, 75 Ohm E1 Distr Panel with 2-120 Ohm, 25-twisted pair shielded cables, 75 Ohm adapter
and 16 120 Ohm 4-twisted pair shielded cables (E1-IMA/+)
Optional T1/E1 8-Port Break-out Cable Assy, 50-pin RJ48M to 8 RJ45C (for any IMA/+ LIMs)
Kit, E&M 8-port 2/4-wire Interface Plugin Card for Xedge AVM LIM
Kit, FXS Interface Plugin Card for Xedge AVM LIM
Kit, FXO Interface Plugin Card for Xedge AVM LIM
Kit, Plenum for installing two Xedge 664X chassis in an open rack/cabinet
032R440-000
Issue 17
Xedge Cabinets, Chassis, Cables
Xedge 6000 Hardware
Installation & Setup Guide
Part No.
025H604-006
027H703-008
027H608-XXX
027H615-XXX
027H616-XXX
027H620-002
027H590-015
027H591-015
027H593-005
027H440-005
027H441-005
027H442-003
027H443-003
027H444-005
027H445-005
027H446-XXX
027H447-XXX
026H001-XXX
S-830-005-XXX
S-830-006-XXX
S-830-012-XXX
200H012-XXX
029H008-XXX
029H011-XXX
029H010-XXX
029H006-010
025H601-006
025H602-006
027H270-0X5
209-036-032
032M130-002
027H702-0XX
032M131-001
032M164-001
032M165-001
S-032H016-001
TBD
TBD
TBD
010K374-003
1-17