Pcx/Pcx-2 Assembly - General DataComm Xedge 6000 Series Hardware Installation

V7.x Packet Controllers

PCX/PCX-2 Assembly

The PCX/PCX-2 assemblies consists of a base card, a Network Processor daughtercard, and a LIM
Personality Module (LPM) daughtercard. This assembly can support two Line Interface Modules
(LIM1 and LIM2) installed at backplane connectors, shown in the figure accompanying
• The PCX/PCX-2 base card has a single connection to the main backplane, a single connection
to the switch fabric and a single connection to LIM1 (lower LIM slot).
• The LPM daughtercard provides an additional connection to the switch fabric and to LIM 2
(upper LIM slot). The type of LPM in use will determine the type and slot location of LIMs.
• The Network Processor daughtercard provides Ethernet connectivity at the front panel.
Note
At the Physical Layout screen, a PCx with LIM cards installed will be displayed as
not affect the functionality of the PCx or its associated LIMs.
LPM/LIM Applications
PCX/PCX-2 is shipped with one of six types of LPM cards. Depending on the LPM, various
combination of SERDES, Utopia or Serial LIMs can be installed as LIM1 and LIM2, as defined below.
PCX-2 Assembly
200M010-001
200M011-001
200M008-001
200M014-001
200M015-001
200M017-001
.
PCX Assembly
200M001-001
200M002-001
200M004-001
200M003-001
200M007-001
200M013-001
032R440-000
Issue 17
LPM in Use LIM1 (lower LIM slot) LIM2 (upper LIM slot)
LPM-1 Utopia LIM
LPM-2 Utopia LIM
LPM-4 SERDES LIM
LPM-3 Serial LIM
LPM-5 Serial LIM
LPM-6 Serial LIM
LPM in Use LIM1 (lower LIM slot) LIM2 (upper LIM slot)
LPM-1 UTOPIA LIM
LPM-2 UTOPIA LIM
LPM-4 SERDES LIM
LPM-3 Serial LIM
LPM-5 Serial LIM
LPM-6 Serial LIM
Xedge 6000 Hardware
Installation & Setup Guide
PCX/PCX-2 Controller Overview
Unknown
Utopia LIM
SERDES LIM
SERDES LIM
SERDES LIM
Serial LIM
Utopia LIM
UTOPIA LIM
SERDES LIM
SERDES LIM
SERDES LIM
Serial LIM
UTOPIA LIM
Table 4-2.
. This does
4-9