Preface - General DataComm Xedge 6000 Series Hardware Installation

Scope of this Manual
This manual provides a detailed description of the front panel features, hardware setup and
installation procedures for the Xedge 6000 hardware systems: Xedge 6000 for multiservice packet
exchange applications (MSPX), and the legacy Xedge 6000 for ATM applications (Version 6.2.X
All information in this document applies to these components, except where noted. This document
consolidates and updates hardware information previously issued in GDC P/N 032R401-V7.X,
032R410-000 and GDC P/N 032R440-V62X.
• Refer to the latest Xedge 6000 for MSPx Applications Version 7.x Config & Diag Guide
(032R401) to configure Xedge packet controllers and their LIMs.
• Refer to the latest Xedge 6000 for ATM Applications Version 6.2.x Config & Diag Guide
(032R400) to configure legacy Xedge cell/adaptation controllers and their LIMs.
• Always read the latest software release and patch notes supporting your Xedge modules for
a list of new features, bug fixes, known issues, installation requirements, etc.
• Related Publications
This information is intended for qualified network operators and administrators who are
experienced in setting up and managing MPLS and ATM traffic and signaling in Xedge 6000
networks. Wiring must comply with the local electrical codes in your area that govern the
installation of electronic equipment. A background knowledge of voice and data
telecommunications, network architecture and terminology is assumed.
The information contained in this manual has been carefully checked and is believed to be entirely
reliable. As General DataComm continually improves the reliability, function and design of its
products, it is possible that some information may not be current. Contact General DataComm, your
sales representative or point your browser to http://www.gdc.com for the latest information.
Manual Organization
This manual is divided into chapters that describe installation instructions, front panel indicators
and connectors, and jumper and switch settings of the various Xedge modules. When using the
digital version of this manual, click on any link (shown in blue text) to jump to that section.
Chapter 1, Xedge Hardware Overview
Chapter 2, Xedge Chassis Systems
Chapter 3, Switch Fabric and V6.2 Controllers
Chapter 4, V7.x Packet Controllers
Chapter 5, Line Interface Modules
Chapter 6, Network Timing Modules
Chapter 7, System Management Modules
032R440-000
Issue 17
are listed on the inside front cover of this document.
Xedge 6000 Hardware
Installation & Setup Guide

Preface

vii