General DataComm Xedge 6000 Series Hardware Installation page 55

Xedge Chassis Systems
For non-redundant power supplies and a single station battery source:
1. Connect the positive side of the battery to the terminals marked +V on both power entry
modules.
2. Connect the negative side of the battery to the terminals marked -V on both power entry
modules.
For redundant power supplies and dual station battery source:
1. Connect the positive side of one battery to the terminal marked +V on the "A" power input
module.
2. Connect the negative side of the same battery to the terminal marked -V on the "A" power
input module.
3. Connect the positive side of the second battery to the terminal marked +V on the "B" power
input module.
4. Connect the negative side of the second battery to the terminal marked -V on the "B" power
input module.
Figure 2-7
032R440-000
Issue 17
Xedge 6280 DC Power Connections
Xedge 6000 Hardware
Installation & Setup Guide
Xedge 6280 Chassis
2-25