General DataComm Xedge 6000 Series Hardware Installation page 64

Xedge Chassis Systems
Front-Mount Installation (19-inch Rack/Cabinet)
Use the mounting brackets and screws provided with the chassis, as described below:
1. Position the chassis in the cabinet so that the holes in the mounting brackets are aligned with
the holes in the cabinet mounting strips.
2. Secure the brackets to the cabinet mounting strips using the provided screws.
Flush-Mount Installation (23-inch Rack/Cabinet)
Use the optional 23-inch flush-mount kit (P/N 010K362-001), as described below:
1. Attach 23-inch brackets provided with the kit to the factory installed brackets on the chassis.
2. Position the chassis in the cabinet so that the holes in the mounting brackets are aligned with
the holes in the cabinet mounting strips.
3. Secure the front and rear brackets to the cabinet mounting strips using the provided screws.
Mid-Mount Installation (19- or 23-inch Rack/Cabinet)
Use the optional mounting kit (P/N 010K359-001), as
described:
1. Install the center of gravity bracket to the chassis
• For 19-inch cabinets, affix the wide part of the
bracket flush against the chassis.
• For 23-inch cabinets, affix the narrow part of the
bracket flush against the chassis.
2. Position the chassis in the cabinet with the bracket holes
aligned with the holes in the cabinet mounting strips.
3. Secure the bracket to the cabinet mounting strips using the
provided screws.
2-34 Xedge 6000 Hardware
Installation & Setup Guide
Xedge 6640/6645 Chassis
A A
Front
View A-A View A-A
19" Position 23" Position
032R440-000
Issue 17
Rear