Table of Contents
Advertisement
Xedge Hardware Overview
ISG2 Slot Controllers
•
Lowers costs of branch/remote IP access-to-centralized routing resources.
•
Supports OSPF, RIP2 Routing, and deterministic static routes.
•
Guarantees quality of service by routing IP traffic across Xedge networks based on destination
IP address & IP classification. (Traffic shaping and IP QoS)
•
Extends IP connectivity and services on converged networks carrying voice, multimedia and
low-speed data applications that require explicit service quality.
•
Provides standard-based SNMP management interface for Xedge switches.
•
Installs in one slot-0 or nonslot-0 position in any Xedge 6000 chassis.
•
LIMs not required.
PCX/PCX-2 Slot Controllers
•
Complies with Metro Ethernet Forum (MEF) compliant Ethernet Private Line
•
High speed, high capacity packet switching
•
Dual control plane for MPLS or ATM transport
•
Supports layer 2 or layer 3 VPNs
•
Flexible Routing includes PNNI, OSPF-TE
•
Installs in two adjacent slot-0 or nonslot-0 positions in any Xedge 6000 chassis.
•
Supports up to two Serdes-, Utopia-, or Serial-type LIMs (in any combination)
PCL Slot Controller
•
Cost-effective DS1 IMA to DS3 or E1 IMA to E3 cell-relay transport
•
ATM standard compliant ATMF UNI 3.1 solution
•
Conformance with IMA 1.0 and IMA 1.1 standards
•
NNI support for both DS1/E1 IMA or DS3/E3 ATM LIMs
•
Fast Ethernet for management and/or Ethernet/IP data (up to 4 connections)
•
ATM loopback and diagnostic of physical layer performance
•
Selectable PLCP or HEC formats for DS3/E3
•
Next generation platform supports migration to Ethernet/IP MPLS based solutions
PCE Slot Controller
•
Circuit emulation (T1/E1, DS3/E3, Serial) with clock recovery over Ethernet
•
High speed Ethernet, Metro Ethernet & VLAN services
•
Gigabit Ethernet trunks for copper (10,100,1000) or GE optical SFP plugs
•
Built-in IP router with RIP, OSPF
•
Isochronous data transport over Ethernet for telemetry and Doppler acquisition data transport
•
Conformance to Ethernet standards including 802.1x port-based access control and 802.1p
•
Conformance to SAToP, CESoPSN and TDMoIP specifications for circuit over packet
•
Conformance to IETF, MEF, ITU, and IEEE standards.
•
Supports a variety of T1, E1, T3, E3, and Serial I/O LIMs.
•
When deployed with Xedge PCX technology, Xedge PCE can facilitate TDM or Ethernet
convergence over MPLS, VLAN, or Ethernet/IP.
032R440-000
Issue 17
Xedge 6000 Hardware
Installation & Setup Guide
Slot Controller Overview
1-5
Advertisement
Table of Contents
