Table 43 Vertical Tab Commands - Star Micronics Radix User Manual

Formattine Your Outuut
95
A one-shot vertical tab command
There's a one-time vertical tab command that works just like
the one-time horizontal tab command. It is (ESC) "a" CHR$(n),
and it causes the paper to advance n lines. It doesn't change the
settings of the vertical tabs.
1 Function
Table 9-3
Vertical tab commands
I Control code
1 Advance naner to next I
I
tab position'
CHR$(ll)
Set vertical tabs at nl, n2, etc.
(ESC) "P" CHR$(nl) CHR$(n2)...CHR$(O)
Advance paper n lines
(ESC) "a" CHR$(n)
Note: If your computer
does not support lowercase characters, use CHR$(97)
for "a."
Summary
Control code
CHW(9)
( ESC) "D" nl n2 n3 . . .
(ESC) "b" n
(ESC) "M" n
(ESC) "Q" n
CHR$(ll)
(ESC) "P,'
nl n2 n3. . .
(ESC) "a" n
Function
Horizontal tab
CHR$(O) Set horizontal tabs
One-time horizontal tab of n
spaces
Set left margin
Set right margin
Vertical tab
CHR!$(O) Set vertical tabs
One-time vertical tab of n lines