Star Micronics Radix User Manual page 275

DIP Switch Settings
261
Figure H-2. Radix's DIP switches are located under the front cover.
Switch B
Switch C
A-3
A-4
A-5
This switch selects the default character pitch. If this
switch is ON the default pitch is
10
CPI. If this switch
is OFF the default pitch is 17 CPI. This switch is set
ON at the factory. This switch has no effect if switch
A-4 is off.
Switch A-4 selects the default character style. If this
switch is ON then the default character style is nor-
mal characters. If this switch is OFF then the default
character style is near letter quality. If this switch is
OFF then switches
A-2
and A-3 have no effect. This
switch is set ON at the factory.
This switch sets the default line spacing. When this
switch is ON the default line spacing is set to
l/S
inch.
This means that Radix will advance the paper
l/S
inch each time it receives a line feed. When this
switch is OFF the default line spacing is
l/S
inch.
This switch is set ON at the factory.