Star Micronics Radix User Manual page 306

292
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
t;teci~~rn~XII)
ex
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Radix User's Manual
Change the line spacing to l/8 inch.
(ESC) "0"
27
48
1B
30
This command sets the distance the paper ad-
vances or reverses during all subsequent line
feeds to l/8 inch. You can select l/S inch line
spacing as the power-on default by turning
DIP switch A-5 off.
Chapter 8
Change the line spacing to
7/72
inch.
(ESC) "1"
27
49
1B
31
This command sets the actual distance the
paper advances or reverses during all subse-
quent line feeds to 7/72 inch.
Chapter 8
Change the line spacing to l/6 inch.
(ESC) "2"
27
50
1B
32
This command sets the actual distance the
paper advances or reverses during all subse-
quent line feeds to l/6 inch. You can select l/S
inch line spacing as the power-on default by
turning DIP switch A-5 on.
Chapter 8
-