Table of Contents
Advertisement
298
Radix User's Manual
Commands
to Control Horizontal Position
of Print Head
-
'-.
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
This command returns the print head to the
home position (the left margin). If DIP switch
C-4 has been set on, then this command will
also cause a line feed character to be genera-
ted after the carriage return, thereby advanc-
ing to the beginning
of the next print line
automatically.
Chapter 8
PURPOSE:
Set the left print margin.
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
(ESC)
"M"
n
27
77
n
1B
4D
n
This command
sets the home position re-
turned to during the execution of all subse-
quent carriage returns to be print position n.
The power on default for n is 1. The value of n
must be between 1 and 255. For Radix-10 the
maximum print position for pica pitch is 80,
for elite is 96, and for condensed pitch is 136.
For Radix-15 the maximum print position for
pica pitch is 136, for elite is 163, and for con-
densed pitch is 233.
Chapter 9
REFERENCE:
Return print head to home position (Car-
riage Return).
(CR)
13
OD
-_
-
-
-
-
-
.-
Advertisement
Table of Contents
