Switch Functions - Star Micronics Radix User Manual

260
Radix User's Manual
DIP switch B controls the serial interface and is covered in
Appendix G. The individual switches on DIP switch A are called
A-l
through A-8; those on switch C are
C-l
through C-4.
Switch 1
Table H-l Table H-l
DIP switch settings DIP switch settings
ON
Switch A
OFF
International character
rnational character set selection - see Table H-2
set selection - see Table H-2
Switch C
A-6
A-7
A-6
Paper-out detector on
Serial interface
7-bit interface
Auto LF with CR
Ignore paper-out
Parallel interface
6-bit interface
LF must be from host
DIP switch A controls the default settings for printing func-
tions. DIP switch C controls the interface.
Switch Functions
Switch
A-l
A-2
Function
Switch
A-l
sets the default page length for Radix. If
switch
A-l
is ON, the page length is set to 11". When
switch
A-l
is OFF the page length is set to
12".
This
switch is set ON at the factory.
This switch selects either normal or emphasized
print for the default. If this switch is ON then Radix
will print normal type when the power is turned on.
If this switch is OFF then Radix will print empha-
sized type when the power is turned on. This switch
is set ON at the factory. This switch has no effect if
switch A-4 is off.