Star Micronics Radix User Manual page 310

296
PURPOSE:
Set the bottom margin.
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
(ESC)
"N"
n
27 78
n
1B 4E n
This command sets the margin at the bottom
of the page to n lines. The printer will auto-
matically execute a form feed when the num-
ber of lines left on a page is equal to n. The
value of n must be between 1 and 127. This
command is sometimes referred to as "skip-
over-perforation."
Chapter 8
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Vertical tabs
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Radix User's Manual
.-_
Cancel top and bottom margins.
(ESC)
"0"
27
79
1B 4F
This command cancels both the top margin
set by (ESC) "R" n and the bottom margin
set by (ESC) "N" n.
Chapter 8
Advance paper to the next vertical tab posi-
tion.
(VT)
11
OB
This command causes the paper to be ad-
vanced to the next vertical tab position, or the
top of the next page, whichever it finds first.
The vertical tab positions are set upon power
onatlines
6,12,18,24, 30, 36,42,48,54,
and
60.
Chapter 9