Form Feed Controls - Star Micronics Radix User Manual

294
, Radix User's Manual
PURPOSE:
Send a onetime reverse line feed of n/144
inch.
CODE:
(ESC) "j" n
(decimal ASCII)
27 106
n
(hex ASCII)
1B
6A
n
REMARKS: This command causes the printer to reverse
the paper n/144 inch and return the print
head to the left margin. It does not change the
--
current value of the line spacing. The value of
n must be between 0 and 255.
REFERENCE: Chapter 8
Form feed controls
PURPOSE:
Advance paper to top of next page (Form
Feed).
(FF)
12
oc
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
The actual length of a page ejected by a form
feed is set either by the setting of DIP switch
A-l or through various codes which can be
sent (see below).
Chapter 8
Reverse the paper to the top of the current
page.
(ESC) (FF)
27
1B
E
This command causes the printer to reverse
the paper to the top of the current printing
page (or form).
Chapter 8
--
. .