Star Micronics Radix User Manual page 58

44
Radix User's Manual
new page. Use this option to start on a new page.
Selecting the Align option tells Lotus
l-2-3
that you have
moved the paper to the top of a new page. Use this option after
using the FE button to move the paper or after inserting a new
single sheet of paper.
The Clear option allows you to clear any or all of the other
options that you have selected. The Quit option ends the /Print
command and returns you to Ready Mode.
Selecting Options from the /Print menu presents you with
some additional page format selections.
You can add Headers or Footers to each page of your output. A
header is a line that prints at the top of each page, while a footer is
a line that prints at the bottom of each page.
Lotus
l-2-3
has three characters that perform special func-
tions when they are included in a header or a footer. You can
include sequential page numbers on each page by including the #
character where you want the page number to print (For example:
Page #).
The current date will be printed if you include the @ charac-
ter in a header or footer. (For example: As of @.)
You can direct sections of headers and footers to the left, right,
or center by using the 1 character. Each header or footer is
divided into three sections; Left, center, and right. The 1 character
shows the limits of these sections. So to print a header with the
date to the left, a title in the center, and a page number to the right,
the header might look like this:
.._
8) Spreadsheet Title 1 Page #
And, on January
12, 1984,
the results might look like this: --
12-Jan-84 Spreadsheet Title Page 1
Another of the selections under Options is Setup. This selec-
tion allows you to create a setup string that will be sent to the
printer before each section of a spreadsheet is printed. You can
include non-printing codes in the setup string by using a back-
slash ( \ ) followed by a three digit number that consists of the
decimal ASCII value for the code that you wish to send (with lead- --