Star Micronics Radix User Manual page 299

Function Code Reference
285
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Set the print pitch to condensed (17 charac-
ters/inch).
(ESC) "B"
3
27
66 3
1B 42 03
This command causes all subsequent print-
ing except NLQ characters to be done in con-
densed type of 17 characters per inch. This
command also sets the maximum number of
print columns to 136 on the Radix-10 and 233
on the Radix-15. You can select condensed
type as the power-on default by turning DIP
switch A-3 off.
Chapter 7
Set the print pitch to pica (10 characters/
inch).
(DC2)
18
12
This command is the same as (ESC) "B" 1,
but can be used in applications where a sin-
gle-character command is required.
Chapter 7
Set the print pitch to condensed (17 charac-
ters/inch).
(SI)
15
OF
This command is the same as ( ESC ) "B" 3,
but can be used in applications where a sin-
gle-character command is required.
Chapter 7