Star Micronics Radix User Manual page 273

._.
Appendix H
DIP Switch Settings
The DIP (dual in-line package) switches control some of the
functions of Radix. A DIP switch actually contains several indi-
vidual switches. Radix has one DIP switch with 8 individual
switches in it, one with
10
individual switches, and one DIP
switch with 4 individual switches. Figure
H-l
is a drawing of a
typical DIP switch.
Figure H-l. A DIP switch is actually a series of seved
small
switches.
All three DIP switches are readily accessible from the top.
They are located in the compartment with the print head, and can
be seen by opening the front cover. To change the setting of a
switch, use a ballpoint pen or a similar object. The "on" position
for a switch is towards the back of the printer; "off' is towards the
front.
Never change the settings of any of the DIP switches when
the power is on. Turn off both the printer and your computer.
Table H-l summarizes the functions of DIP switches A and C.