Vertical Position Commands - Star Micronics Multi-Font LC-IOII User Manual

Select character height, width,
and line spacing
Mode ASCII
Decimal
Hexadecimal
<ESC> "["
'x3"
<4>
27 91 64 4 1B 5B 40 04
Both
co> co> -co> n
0 0 0
n 00 00 00 n
m m
m
Selects a combination of character height, width, and line spacing ac-
cording to the value of n and m, as below. Does not
move
the base line.
n
Line spacing Character height
0 Unchanged Unchanged
:
Unchanged Single height
Unchanged Double height
16 Single Unchanged
17 Single
Single height
18 Single Double height
32 Double Unchanged
33 Double Single height
34 Double
Double height
m Character width
1 Single width (same as < ESC > "W" 0)
2 Double width (same as < ESC> "W" 1)
1
Double-height characters are always printed at near letter quality. Double
height printing temporarily cancels the super/subscript and condensed
printing modes, but these modes resume when the printer returns to
normal height.
-
VERTICAL POSITION COMMANDS
Set line spacing to 118 inch
Mode ASCII
Decimal
Hexadecimal
Both
< ESC > "0"
27 48
1B 30
Sets the distance the paper advances or reverses in subsequent line feeds
to l/8 inch.
70